新聞中心
滾珠絲杠副裝配中有什么突出問題?
來源:http://www.feicui77.cn/ 日期:2020-10-08 發布人:
就一定升高滾珠絲杠副在母機上的可靠的安裝方式與方式,才能保證絲杠工作精度。
In order to ensure the working accuracy of the ball screw, the reliable installation mode and mode of the ball screw pair on the master machine must be increased.
滾珠絲杠自身分量導致的天然下垂而發生的直線度不能夠對機床活動存在的危機緣故之一。絲杠的直線度無論對絲杠轉動型或螺母轉動型的絲杠都相當重要,安裝精度不好會對絲杠的運行和壽命導致一系列的問題。要處理此類問題平常對絲杠選用預拉伸或輔助維持方式。
One of the reasons is that the straightness caused by the natural sagging of the ball screw itself can not affect the machine tool activities. The straightness of the lead screw is very important for either the screw rotation type or the nut rotation type screw. The poor installation accuracy will lead to a series of problems on the operation and life of the screw. In order to deal with this kind of problem, we usually choose the pre stretching or auxiliary maintenance mode for the lead screw.
導軌絲杠
Guide screw

滾珠絲杠副是數控機床的部件。近幾年跟著數控機床的迅速發展,對進給體系提出了更高的要求。當今,數控機床制造技藝正在向著高精度、高可靠性、高速度、數字化及智能化目標發展。滾珠絲杠副運行是否穩定, 取決于滾珠絲杠副沖突力矩的變動量。沖突力矩的振動直接影響驅動體系的穩定性, 越發是在高速驅動時對噪聲、溫升、定位精度等影響更加凸出。而且沖突力矩影響絲杠的定位精度,研討滾珠絲杠副沖突力矩對絲杠的傳動功能擁有現實意義。
Ball screw pair is the key part of CNC machine tool. In recent years, with the rapid development of CNC machine tools, higher requirements are put forward for the feed system. Nowadays, the manufacturing technology of CNC machine tools is developing towards the goal of high precision, high reliability, high speed, digitalization and intellectualization. Whether the ball screw pair is stable or not depends on the variation of the collision torque of the ball screw pair. The vibration of the conflict torque directly affects the stability of the drive system, and the impact on the noise, temperature rise, positioning accuracy and so on is more prominent in high-speed driving. Moreover, the conflict torque affects the positioning accuracy of the ball screw, so it is of practical significance to study the collision torque of the ball screw pair for the transmission function of the screw.
如果您對導軌絲杠還有哪些不懂的問題,是可以直接咨詢以下的網址:http://www.feicui77.cn
If you have any questions about the guide screw, you can directly consult the following website: http://www.feicui77.cn
- 上一篇:直線導軌是如何進行清洗的?
- 下一篇:直線導軌裝配如何進行防銹工作?
相關新聞 /RELATED TO RECOMMEND
滾珠絲桿裝配錯1步=精度報廢,導軌絲杠精密裝配全流程,零間隙實操指南
2026-04-27
導軌絲杠:精密傳動界的扛把子,聊聊滾珠絲桿的那些事
2026-04-24
導軌絲杠:滾珠絲杠副冷卻結構設計及溫升影響分析
2026-04-22
導軌絲杠選型避坑,梯形VS滾珠絲桿核心區別,90%從業者都選錯
2026-04-20
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25




