新聞中心
滾珠絲桿的金屬返向器與塑料返向器的區別
來源:http://www.feicui77.cn/ 日期:2021-04-29 發布人:
PVP滾珠絲桿由絲桿、螺母和滾珠組成。它的功能是將旋轉運動轉化成直線運動,這是滾珠絲桿的進一步延伸和發展,這項發展的重要意義就是將軸承從滾動動作變成滑動動作。由于具有很小的摩擦阻力,滾珠絲桿被廣泛應用于各種工業設備和精 密儀器。
PVP ball screw consists of screw, nut and ball. Its function is to transform rotary motion into linear motion, which is the further extension and development of ball screw. The significance of this development is to change the bearing from rolling motion to sliding motion. Due to its small friction resistance, ball screw is widely used in various industrial equipment and precision instruments.
滾珠絲桿是工具機和精 密機械上常使用的傳動元件,其主要功能是將旋轉運動轉換成線性運動,或?qū)⑴ぞ剞D(zhuǎn)換成軸向反覆作用力,同時兼具高精度、可逆性和高 效率的特點。
Ball screw is often used in tool machines and precision machinery. Its main function is to convert rotary motion into linear motion or torque into axial repetitive force. At the same time, it has the characteristics of high precision, reversibility and high efficiency.

一、pvp滾珠絲桿的金屬返向器對比塑料返向器有以下幾點優勢:
1、 Compared with plastic ball screw, metal ball screw has the following advantages
1、耐磨損,保證了滾珠絲桿的使用壽命和穩定性。
1. Wear resistance ensures the service life and stability of the ball screw.
2、耐高溫,在高溫的工況環境下不變形。
2. High temperature resistance, no deformation in high temperature environment.
3、金屬返向器更為順暢的滾珠彎道設計使?jié)L珠絲桿的傳動工作更加順滑自然。
3. The smoother design of the ball curve of the metal reverser makes the transmission of the ball screw more smooth and natural.
4、一般的螺母分兩次磨,我們的螺母一次成型,同心度更高,精 密度更高。
4. The general nut is grinded twice, our nut is molded once, with higher concentricity and precision.
二、滾珠絲桿的選定要領
2、 Selection of ball screw
選擇滾珠絲桿時,要調查清楚運轉條件再?zèng)Q定設計。選擇的要素有負荷重量、衝程、力矩、定位精度、重覆定位精度、剛性、導程、螺帽孔徑等,各個要素之間都有關聯,其中一項要素改變就會引起其他要素的改變,必須注意各要素之間的均衡。
When selecting the ball screw, we should first investigate the operating conditions and then decide the design. The selected elements include load weight, stroke, torque, positioning accuracy, repeat positioning accuracy, rigidity, lead, nut hole diameter, etc. all the elements are related. The change of one element will cause the change of other elements, so we must pay attention to the balance among the elements.
1、潤滑
1. Lubrication
使用滾珠絲桿時,必須要具有足夠的潤滑,如果潤滑不夠會發生與金屬接觸,導致摩擦與摩耗的增加,造成故障或是壽命縮短等。
When using the ball screw, it must have enough lubrication. If the lubrication is not enough, it will contact with the metal, resulting in the increase of friction and friction, resulting in failure or shortened service life.
2、偏荷重
2. Partial load
當偏荷重現象發生時,將直接影響絲桿的壽命及噪音,且多隨著運轉不順的手感,若絲桿空載時與組裝后順暢度不同,除了注意絲桿本身的精度外,大多是組合精度不良產生偏荷重現象。
When the phenomenon of partial load occurs, it will directly affect the life and noise of the screw rod, and with the operation of the handle is not smooth, if the smoothness of the screw rod is different from that after assembly, in addition to paying attention to the accuracy of the screw rod itself, most of them are poor combination accuracy, resulting in the phenomenon of partial load.
- 上一篇:導軌滑塊固定安裝如何使用鉗制器
- 下一篇:軸承的自身密封技術分析
相關新聞 /RELATED TO RECOMMEND
滾珠絲桿裝配錯1步=精度報廢,導軌絲杠精密裝配全流程,零間隙實操指南
2026-04-27
導軌絲杠:精密傳動界的扛把子,聊聊滾珠絲桿的那些事
2026-04-24
導軌絲杠:滾珠絲杠副冷卻結構設計及溫升影響分析
2026-04-22
導軌絲杠選型避坑,梯形VS滾珠絲桿核心區別,90%從業者都選錯
2026-04-20
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
相關產品 /RELATED TO RECOMMEND




