新聞中心
直線導軌潤滑方式有多少種類?
來源:http://www.feicui77.cn/ 日期:2021-09-06 發布人:
直線導軌潤滑方式有很多種,每個都有不同的潤滑方式,這個可以根據客戶要求在不同位置來安裝。同樣的可能安裝方式不一樣,但是他們的總的要求一般都是一樣的。
There are many lubrication methods for linear guide rail. Each brand has different lubrication methods. This can be installed in different positions according to customer requirements. The same brand may have different installation methods, but their general requirements are generally the same.
直線導軌的潤滑方式根據客戶需要在滑塊前端或者后端裝上油嘴以供手動打油,RG系列特別在端蓋側面與上面均預留油孔位置以安裝油嘴(一般為直油嘴),提供側向與上方打油。
The lubrication mode of the linear guide rail is to install an oil nozzle at the front or rear end of the slider according to the customer's needs for manual oil pumping. RG series especially reserves oil holes on the side and above the end cover to install the oil nozzle (generally straight oil nozzle) to provide lateral and upper oil pumping.


側向打油的位置建議在非側基準邊,但若有特殊需要也可以放在側基準面旁??蛻羧粲猩鲜鰝认虼蛴突蛘呱戏酱蛴托枨?,我們也可以讓我們的工程師來通過設計不同的方案來解決這種問題。同時也可以根據以下幾個方面來確定。
The position of lateral oiling is recommended to be on the non side datum side, but it can also be placed next to the side datum plane if there are special needs. If the customer has the above demand for lateral or upper oiling, we can also ask our engineers to solve this problem by designing different solutions. At the same time, it can also be determined according to the following aspects.
如果客戶的工作環境在相對污染的情況下,那么我們盡量把打油的油孔安裝到直線導軌的外側來實現,這樣避免進了臟東西導致直線導軌滑動起來不順暢。還有一種情況就是不是很污染的環境,我們也可以在直線導軌的上面打油孔來實現。盡量安裝使用手動打油的那種的也好,這樣可以增加直線導軌滑動的順暢度。
If the customer's working environment is relatively polluted, we try to install the oil hole for oiling on the outside of the linear guide rail, so as to avoid that the linear guide rail does not slide smoothly due to dirt. Another situation is that the environment is not very polluted. We can also drill oil holes on the linear guide rail. Try to install the manual oiling one, which can increase the smoothness of linear guide rail sliding.
總之,直線導軌的潤滑方式有很多種,我們可以根據客戶的要求來隨時隨位置進行安裝。
In short, there are many ways to lubricate the linear guide rail. We can install it at any time according to the customer's requirements.
- 上一篇:如何提高滾珠絲桿副的使用壽命?
- 下一篇:滾珠絲桿和直線導軌的特性區別在哪里?
相關新聞 /RELATED TO RECOMMEND
導軌絲杠選型必看!滾珠絲杠研磨級VS軋制級,選錯多花冤枉錢還影響精度
2026-05-04
導軌絲杠選型避坑!滾珠絲杠為何普遍不加減速機?附電機驅動選型案例
2026-05-03
滾珠絲桿裝配錯1步=精度報廢,導軌絲杠精密裝配全流程,零間隙實操指南
2026-04-27
導軌絲杠:精密傳動界的扛把子,聊聊滾珠絲桿的那些事
2026-04-24
導軌絲杠:滾珠絲杠副冷卻結構設計及溫升影響分析
2026-04-22
導軌絲杠選型避坑,梯形VS滾珠絲桿核心區別,90%從業者都選錯
2026-04-20
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26




